|Availability:||In stock (100)|
|Delivery time:||5-10 business days|
Tranemo Workwear 5040-88 Cantex Weld Stretch Dungarees
Flame Retardant Hi-Vis Dungarees in Cantex Weld at the front, and Cantex Stretch at the back. Cantex Stretch gives the dungarees flexibility and offers freedom of movement and high comfort, while Cantex Weld offers extra high protection at the front against welding and grinding spatter.
Adjustable braces with concealed fix-lock closure and elastic at the back. Zipper front. Chest pockets, one with flap. Concealed buttons. inner pocket. Waist adjustable in width and fitted with loops. Side pockets. Cargo pocket with flap, telephone pocket, pen loop and concealed key ring. Ruler pocket with flap and reinforced bottom. Height-adjustable knee pockets. Back pockets with flap. Contrast stitching. Length and short sizes are produced to order. The delivery time is approximately 5 extra working days.
- Cantex Weld, 365 gsm, LOI: 29.0%
- Cantex Stretch, 365 g/m², LOI: 29.5%
These Cantex Weld Stretch Dungarees are available in the following colors and sizes:
|94 yellow/navy||C44-C64, C146-C156, D96-D120|
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 – This standard describes protective clothing against heat and flames.
IEC 61482-2 APC 1 ELIM: 9.4 cal/cm² ATPV: 12.0 cal/cm²
IEC 61482-2 – This standard specifies PPE clothing that protects against the risk of an electric arc.
EN ISO 1149-5 - This standard describes PPE clothing that is used in an explosive hazardous environment, in other words ATEX environment where there is a risk of sparks being created by the clothing which can lead to an explosion.
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 – This standard describes PPE clothing used in welding or related processes where there is a risk of metal spatter, momentary contact with flames, radiant heat from the arc flash, electric shock from short circuit and incidental contact with voltage conductors with a voltage up to approx. 100 V DC under normal welding conditions.
EN 13034 type PB
EN ISO 13034 - This standard describes PPE clothing that is used at the risk of exposure to a light mist of chemical liquids or small splashes, against which a liquid-tight barrier (at molecular level) is not required.
EN ISO 20471 High Visibility Clothing
EN ISO 20471 - This standard describes PPE clothing that is used in situations where it is necessary to be clearly visible to traffic both during the day and at night. This standard has three different classes divided over three different risks and the maximum level is class 3.